Concrete Repair Products

  • A unique concrete patch, repair and resurfacing material.
  •  Fortified with polymers for superior bonding of patches and repairs.
  • Apply in layers from ½ inch down to a feather edge.
  • Apply with a trowel or as a brush coat over larger areas.
  • Make old concrete surfaces look new again.
  • Available in white.
  • Just add water.

USE: For smoothing and overcoating concrete walls. Patch and fill minor defects in cast concrete.

YIELD: One 25 kg (55 lb.) sack yields approx. 15 square meters (160 sq. ft.) when mixed and applied as a sacking mix. One 25 kg (55 lb.) sack yields approx. 5.1 square meters (55 sq. ft.) when mixed and applied as a parging mix.

  • For flexible, durable crack filling in concrete and masonry.
  • For vertical and horizontal surfaces.
  • Protect against damaging freeze/thaw cycles.
  • Repairs cracks from 1/8" to 3/8".
  • Ready to use.

USE: Recommended to damp proof concrete foundations, basement floors, slabs, tanks, and concrete pipe. Forms a hardened surface that will not crack.

YIELD: At a recommended thickness of 1/16”, 1 lb. of Damp Seal will cover up to 6 square feet, depending on surface conditions.

SIZE: 3.3 lbs, 8.8 lbs, 22 lbs.

USE: Recommended for stopping the flow of water through breaks in masonry surfaces, construction faults and holes. Will even set up under water. Will begin to set in 3 - 5 minutes.

YIELD: 1lb produces 15 cubic inches.

SIZE: 4.4 lbs, 9.9 lbs, 22 lbs or 55 lbs.          

  • Instant setting hydraulic cement.
  • Great for leaks in pools or stopping other active leaks in concrete and masonry.
  • For all kinds of instant repairs to concrete and masonry. No need for forms or braces.
  • Available in white.
  • Just add water.

USE: Resurface concrete walks, slabs, driveways and patios. Can be applied in a flowableconsistency using a squeegee or in a stiffer consistency using a trowel.

YIELD: 18kg (40 lb) will cover 4.6 square meters (50square feet) at 1.6 mm (1/16") thick.

  • For fast repairs to concrete that set in 20 minutes and can be opened to foot traffic in 4 hours.
  • Apply in thicknesses from 1/2 inch to 2 inches.
  • For rapid repairs of concrete steps, walks, drives and patios.
  • Just add water.

USE: For repair of concrete bridge decks, roadways, sidewalks, curbs or any other concrete repair application where a durable, rapid setting, high early strength concrete is required.

YIELD: Coverage depends on project size. Please see the Traffic Patch technical specifications sheet for more information.

  • Fill and seal cracks in concrete up to 1/2 inch wide
  • Flexible, durable material
  • Apply to protect concrete surfaces against damaging freeze/thaw cycles
  • Ready to use
  • 1 qt. bottle

USE: Fill cracks and holes on blacktop surfaces. Does not require torch application and does not track after compaction. Made from recycled materials. Low V.O.C.S

YIELD: 22.7 kg (50 lb) bag will fill a 0.2 square meter (2 square foot) hole at 5cm (2") depth.

USE: Fills narrow cracks on horizontal concrete and masonry surfaces. Can be used indoors and outdoors, (can't be used on vertical surfaces).

YIELD: 1.06 quart will fill approximately 60 feet of cracks at 1/4 inch by 1/4 inch.

SIZE: 1 quart

USE: For repairing holes and cracks in cement-based stucco. Will accept acrylic paint or stucco finish coat. Contains microfibers to prevent cracking.

YIELD: 5kg (11 lb) will cover 0.234 square meters (2.56 square feet) at 13mm (1/2") thick.

USE: For repair of marine structures, saw mills, swimming pools, salted roadways, sulphur or potash handling facilities, pulp mills, food processing plants, parking structures, bridge decks, ore-processing and leaching areas. Ideal for applications where thickness exceeds 2.5 cm (1 inch). For applications less than 2.5 cm (1 inch), a sanded formulation is available.

YIELD: One 25 kg (55 lb.) sack yields .012 cubic metres (.42 cubic feet).

USE: Patch or repair connections in concrete pipe, precast concrete, overhead beams, floors, sidewalks, curbs and driveways. Controlled 15-minute set time.

YIELD: 0.49 ft3 per 55 lb. bag.

  • Add strength to your concrete project, or bond new concrete to old concrete.
  • Dilute to use as an admixture.
  • Can be brushed from the bottle for bonding applications.
  • Ready to use.
  • 1 gallon size.

USE: Repair or resurface concrete slabs, driveways, sidewalks, steps, or any worn, chipped or spalled concrete surfaces.

YIELD: 40 lb. bag at a brush coat consistency covers approximately 18 ft2 at 1/4 inch thick.

SIZE: 4.4 lbs, 11 lbs, 22 lbs. or 40 lbs.

  • Anchors bolts and railings with extra strength.
  • Sets in 30 minutes to a super tight grip.
  • Use as a general purpose grout material.
  • Just add water.
  • 10 and 20 lb tub sizes

USE: For concrete surfaces requiring a level, smooth underlayment prior to installing final flooring (tile, carpet, resilient floorings). Walk on in 4 hours, install final floor covering within 5 to 8 hours. Must use with "Prime Seal" to ensure bond and maximize coverage.

YIELD: 50 lb bag covers approximately 20.0 ft2 at 1/4 inch thick. 50 lbs will yield 0.42 ft3.

SIZE: 4.4 lbs, 11 lbs, 22 lbs, or 55 lbs.

USE: For general purpose concrete patching. Patching or repairing connections in concrete pipe, precast concrete, overhead beams and floors. Quick patching repairs on sidewalks, curbs and driveways. Controlled 15-minute set time.

YIELD: 0.49 ft3 per 55 lb. bag.

SIZE: 4.4 lbs (6/box); 11 lbs (4/box); 22 lbs; 55 lbs

USE: For rapid anchoring of bolts, screws, posts, railing, reinforcing rods and other fixtures in concrete. May also be used to fill cracks in concrete. Sets in approximately 15 - 30 minutes.

YIELD: 1 lb produces 20 cubic inches

SIZE: 3.3 lbs, 8.8 lbs, or 22 lbs.        

USE: Repair of concrete pavements, bridge decks, industrial floors, parking garages, freezer floors. Ready for traffic and most loads within 2 hours.

YIELD: Coverage depends on project size.

SIZE: 55lbs. (56 bags per pallet)

USE: General doweling and anchoring, industrial grouting, formed work, airport and highway repair. For applications up to 4".

YIELD: Coverage depends on project size.

SIZE: 10 lbs., 25 lbs., or 55 lbs. 

Two products in one: a clear liquid finish to protect concrete surfaces and an additive that enhances the curing of concrete.

  • Promotes hardening and curing of concrete
  • Water resistant, acrylic coating
  • Protect concrete surfaces
  • Ready to use

A one component sealant which forms a flexible joint with excellent adhesion.

  • Perfect for vertical applications where a non sagging material is required
  • Excellent adhesion properties


For use with bonding concrete, stone, brick, wood, roof tiles, ceramic tiles and metal.

  • A one component adhesive with superior bonding capability
  • Can be used to fill cracks in concrete


A one component sealant which forms a flexible joint with excellent adhesion

  • Can be used for filling expansion joints in concrete surfaces

A polymer modified, flowable resurfacing material for making old concrete surfaces look new again.

  • Highly flowable material for resurfacing large areas of concrete.
  • Makes old, worn concrete look like new.
  • Easy to apply with a lightweight squeegee.
  • Polymer modified for superior bonding strength.